Micromac Compact

Benchtop and portable analyser for measurements of groundwater, surface water, wastewater and seawater

Robust and reliableDesigned for industrial use, environmental monitoring, laboratory analysis, and online applications, it offers the highest level of robustness in its electronic, hydraulic, and mechanical components. With complete separation between the electronic and a simple, robust hydraulic section, it allows for reliable and long-term use.

Easy to installThe analyser is supplied ready for use, following a series of analytical tests performed at the end of its production cycle, along with a set of parts for its field start-up.

Automatic calibrationThe analyser performs pre-settable automatic calibration cycles by the user; the new calibration factor is verified and accepted if it falls within the predefined limits.

Measurement frequency: User-selectable; between two measurements, the analyser remains in standby mode, without consuming any reagents.

Selection of measurement rangesThe analyser operates in an extended measurement field; depending on the sample concentration, the measurement ranges are automatically selected.

Re-analysis of out-of-scale readings: The analyser identifies samples that are out of range and re-analyses the sample after automatic dilution.

Optional sampler: The analyser can optionally be fitted with a portable sampler, which allows for the automatic measurement of up to 8 pre-collected samples.

Advantages and benefits

Simple and user-friendly operator interface
Fully automatic operation
Long service life; low maintenance and low operating costs
Low reagent consumption
Simple to use; the analyser comes with comprehensive documentation, so no special training is required
Completely separate electronics and hydraulics sections
Bidirectional RS232 port for remote control / Modbus RTU or RS485 Modbus port
USB port for data transfer
Annual maintenance.

Applications

Parameters analysed

SKU PWR-MICC-01 Categories Online Analysers, Portable Analysers Tags Alkalinity, Dissolved aluminium, Total aluminium, Ammonia (colorimetric), Ammonia (fluorimetric), Total nitrogen & phosphorus, Total nitrogen, BOD (UV absorption), BOD (fluorimetric), Boro, Dissolved cadmium, Total cadmium, Calcium, Cyanide (index), Free cyanide, Total cyanide, Cyanide WAD, Free chlorine (residual), Residual and total chlorine, Total chlorine, Chlorophyll, Chlorides (colorimetric), Chlorides (ISE), Cobalt, Total cobalt, COD (UV absorption), COD (dichromate), Colour, Chromium(III), Dissolved Chromium 6+, Total chromium, Hardness, Phenols (index), Volatile phenols, Dissolved Iron and Manganese, Total Iron and Manganese, Total iron, Total dissolved iron, Fluorides (ISE), Total phosphorus, Ethylene glycol, Dissolved crude hydrocarbons, Refined dissolved hydrocarbons, Dissolved manganese, Total manganese, Monochloroamine, Dissolved nickel, Total nickel, Nitrate (UV Absorption), Nitrate (hydrazine reduction), Nitrate (UV reduction), Nitrate (VCl₃ reduction), Nitrite, Nutrients (ammonia, nitrate, nitrite, phosphate), Ortho-phosphate, pH, Dissolved lead, Lead and dissolved cadmium, Total Lead and Cadmium, Total lead, Potassium, Dissolved copper, Total price, Sucrose, Silicates, Sulfate, Sulfides, Anionic surfactants (MBAS), Urea, Dissolved zinc, Total zinc

Technical Specifications

MEASUREMENT PRINCIPLE	Dual-beam colorimetric, ISE (ion-selective electrode), NDIR, UV
Measurement type	Batch - Multiparallel version: batch, sequential and multi-wavelength
MEASUREMENT FREQUENCY	Programmable
Measurement time	From 5 minutes to 60 minutes depending on the application
MEASUREMENT POINTS	Up to 4 per single method
Operator Interface	8” colour graphic touch screen (optional)
OUTPUT SIGNAL AND COMMUNICATION PORTS	Separate 4–20 mA outputs for each method or flow, galvanically isolated; RS232 output; optional RS485; optional RTU or Modbus TCP
Entrance Signals	Analysis: 1 digital contact with photocoupler, galvanically isolated Calibration: 1 digital contact with photocoupler, galvanically isolated
ALARM CONTACTS	Auxiliary relay: 1 zero-potential SPDT contact, max load 110 V AC/DC 1 A General fault: 1 SPDT contact, zero potential, max load 110 V AC/DC 1 A Standby/Occupato: 1 x SPDT zero-potential contact, max load 110 V AC/DC 1 A
ALARM MESSAGES	On the operator interface
SAMPLE FEED	Atmospheric pressure Temperature: 10° - 35 °C Volume: 50/80 mL per analysis depending on the analyser model
REAGENT REPLACEMENT	3 to 5 weeks depending on the frequency of measurement
Room temperature	10-45°C (Reagents up to 25°C)
ASSEMBLY	Countertop
STANDARD PROTECTION	IP 55, superior class upon request
HARDWARE	PC104 standard microcontroller, integrated 8" colour touchscreen
Feeding	115/230 V AC 50/60 Hz – IEC socket with external power supply Button – 12/24 V DC on request
ABSORPTION	15 W on standby, 40 W during analysis
WEIGHT	14 kg excluding reagents and the reagent compartment
DIMENSIONS	430 × 260 × 540 mm (H × W × D) excluding the reagent compartment