Easychem 200

Easychem 200 is a fully automated analyser in direct-read discrete technology, with a reading capacity of 60 to 75 samples.

I share refrigerated reagent cabinets, with a capacity for 12 to 27 reagent bottles.;

temperature-controlled reaction plate, containing up to 80 automatically washable reaction cuvettes, reusable after quality control verification;
Colourimetric detector with a 9-position filter wheel for automatic wavelength selection;
pre or post-dilution of the sample;
Productivity: up to 200 samples / hour.

Advantages and benefits

Ease of use: no specific experience or training is required.
Flexibility: measurement parameters are individually selectable for each sample via a list, pre or post-sample analysis autodilution, automatic preparation of working calibrator via dilution of the stock solution;
low reagent consumption: a few microlitres per reagent per analysis;
low operating costs: virtually no wearing parts, low reagent costs;
Immediate start: no time wasted or issues reaching hydraulic balance;
Immediate shutdown: no washing procedure required;
A control program for the Windows operating system: easy to use and learn. Only brief training is required, software specifically designed for use by chemical technicians.
Quality Controls (QC): up to 5 real-time QC levels can be set. Results are automatically stored and presented in a quality control chart separately from the data.
QC actions: if the set tolerances on QC checks are exceeded, the analyser can interrupt the measurement sequence or simply inform the operator, leaving a record of the malfunction, storing the QC check detected outside the set tolerance.
The measurement data reprocessing function allows for post-analysis control of the results file, including or deleting previously set calibration points.

Applications

Parameters analysed

SKU PWR-MICC-15 Category Laboratory analysers Tags Alkalinity, Aldehydes, Dissolved aluminium, Ammonia (colorimetric), Total Ammonia and Phosphorus, Total nitrogen & phosphorus, Total nitrogen, Boro, Bromide, Dissolved cadmium, Calcium, Cyanide (index), Free chlorine (residual), Residual and total chlorine, Total chlorine, Chlorides (colorimetric), Colour, Dissolved Chromium 6+, Hardness, Phenols (index), Volatile phenols, Dissolved Iron and Manganese, Total Iron and Manganese, Total dissolved iron, Total phosphorus, Hydrazine, Iodine, Magnesium, Dissolved manganese, Dissolved molybdenum, Monochloroamine, Dissolved nickel, Nitrate (hydrazine reduction), Nitrate (VCl₃ reduction), Nitrite, Nutrients (ammonia, nitrate, nitrite, phosphate), Ortho-phosphate, Dissolved lead, Potassium, Dissolved copper, Sucrose, Dissolved selenium, Silicates, Sulfate, Sulfides, Urea, Dissolved zinc

Technical Specifications

Technology	Direct reading
SAMPLE / REAGENT PREHEATING	Yes
SAMPLE CAPACITY AND NUMBER OF REAGENTS	a) Samples: 60 positions dedicated to samples / Reagents: 27 positions x 27 mL each, including stock and diluents b) Samples: 70 positions dedicated to samples / Reagents: 17 positions x 27 mL each, including stocks and diluents c) Samples: 75 positions dedicated to samples / Reagents: 12 positions x 27 mL each, including stock and diluents
TEST TIMES	Up to 200, single reagent / 120-150, double reagent
DOSING SYRINGE (SAMPLE AND REAGENTS)	368 microlitres, single syringe with a resolution of 0.14 µL; automatic zeroing; accuracy ± 0.5% from 2 to 350 µL
Reagent tray stock solutions	Yes, calibrants and quality control working from diluted stock
DILUENT POSITION	On your refrigerated reagent tray
Refrigerated reagent tray	Yes, standard
REAGENT AND SAMPLE LEVEL SENSOR	Yes
NUMBER OF REACTION CUVETTES	80 reusable reaction microcuvettes after washing and quality control; incubation temperature programmable +/- 0.1 °C
OPTICAL PATH LENGTH MM	6.0 mm
REACTION PLATE TEMPERATURE	Adjustable from 37 °C to 50 °C, +/- 0.1 °C
Incubator type	Thermoelectric
Flow cell type	BioNex® wash station included
Main detector	Colorimetric, temperature-controlled; extended UV halogen lamp; automatic zeroing; accuracy of +/- 1% from 0 to 2.5 O.D.; linearity better than 0.5%; noise +/- 2 m Abs. at 340 nm 2.5 O.D.
DETECTOR TECHNOLOGY / NUMBER OF WAVELENGTHS	Interference filters / 9 + white
READING METHODS	Endpoint: mono- or bichromatic; differential endpoint; sample blank correction; kinetic
COMMUNICATION AND SOFTWARE	USB port; software compatible with Windows XP, 7.0, 8.0 and 10
SAMPLE ANALYSIS	Saved job lists from the software with the ability to select an independent list of parameters for each sample
CHAMPION ID	Alphanumeric
Random access to samples, calibrations, etc.	Yes
SAMPLE ADDED DURING EXECUTION	Yes
WHITE CHAMPION AND REAGENT	Yes
WORKING CALIBRATION DILUTION	Yes, from stock solution placed in the chilled tray
Pre-run sample dilution	Yes
POST-RUN DILUTION OF THE SAMPLE	Yes, auto-dilution and re-injection of out-of-scale samples
MULTILEVEL QUALITY CONTROL AND CLOSED LOOP	Up to 5 levels, with closed-loop control and pre-programmed actions in case of quality control and/or spike recovery error
DATABASE AND QUALITY CONTROL CHART	Yes
AUTOMATIC SPIKE CONTROL AND RECOVERY	Yes
AUTOMATIC CALIBRATIONS; LINEAR, POLYNOMIAL, ETC. CALIBRATION CURVES.	Yes; up to 16 calibrators
Calibration correction	Yes; it allows you to enable/disable calibrants and modify the calibration fit
QUALITY CONTROL CALIBRATION AND RECALIBRATION	Yes, if the correlation is below the set value for re-calibration
OD WHITE REAGENT CONTROL AND TOP CALIBRANT	Yes, with pre-programmed actions in case of out-of-tolerance conditions
CORRECTION OF RESULTS	Yes, correction by dilution factor, humidity and weight
Importing Work List and Exporting Results to LIMS	Yes
POSSIBILITY OF USING MULTIPLE DILUENTS (SOILS, PHENOLS ANALYSIS, CYANIDES ETC.)	Yes
DIMENSIONS / WEIGHT	40 cm x 67 cm x 60 cm (H x W x D) / 32 kg
Feeding	110-240 VAC - 50/60 Hz; single phase with earth; 2.0 Amp 230 VAC fuses, 4.0 Amp 115 VAC fuses