Easychem Junior

Easychem Junior is a fully automated analyser Automatic In discrete direct-reading technology, with a reading capacity of 10 or 20 samples.

I share refrigerated reagent dispensers, with a capacity for 10 or 20 reagent bottles, each of 18 or 35 ml;
temperature-controlled reaction plate, containing 96 single-use or manually washable reaction cuvettes;
Colourimetric detector with a 9-position filter wheel for automatic wavelength selection;
pre- or post-sample analysis dilution.
Productivity: up to 150 samples / hour.

Easychem Junior. Fully automatic analyser

Advantages and benefits

Ease of useNo specific experience or training is required.;
Flexibilitythe measurement parameters are individually selectable for each sample via a list, pre- or post-analysis sample autodilution, automatic preparation of the working calibrator by diluting the stock solution;
Low reagent consumptionA few microlitres per reagent for analysis;
Low operating costsThere are virtually no wear parts, low cost of reagents.;
Instant startno time wasted or problems reaching hydraulic balance;
Immediate shutdown: no washing procedure required;
Windows operating system control programEasy to use and learn. Only a short training is required, software specifically designed for use by chemical technicians.
Quality Control (QC)Up to 5 levels of real-time QC can be set, results are automatically stored and presented in a quality control chart separately from the data;
QC ActionsIn the event of exceeding the set tolerances on QC controls, the analyser can interrupt the measurement sequence or simply inform the operator, logging the malfunction and archiving the QC control found outside the set tolerance.

The measurement data reprocessing function allows for post-analysis control of the results file, including or deleting previously set calibration points.

Applications

Parameters analysed

Technical Specifications

Technology	Direct reading
SAMPLE / REAGENT PREHEATING	Yes
SAMPLE CAPACITY AND NUMBER OF REAGENTS	a) Samples: 10 positions dedicated to samples / Reagents: 20 positions x 40 mL each, including stocks and diluents b) Samples: 20 positions for samples / Reagents: 10 positions x 40 mL each, including stock and diluents
TEST TIMES	Up to 200, single reagent / 120-150, double reagent
TEST TIMES	Up to 150, single reagent
DOSING SYRINGE (SAMPLE AND REAGENTS)	368-microlitre syringe with a resolution of 0.07 µL; automatic zeroing; accuracy of ±0.5% from 2 to 350 µL
Reagent tray stock solutions	Yes, working calibrators and quality control diluted from stock
DILUENT POSITION	On your refrigerated reagent tray
Refrigerated reagent tray	Yes, standard
REAGENT AND SAMPLE LEVEL SENSOR	Yes
NUMBER OF REACTION CUVETTES	96 single-use reaction microcuvettes; incubation temperature programmable +/- 0.1 °C
Optical Path Length (mm)	10.0 mm
REACTION PLATE TEMPERATURE	Adjustable from 37 °C to 50 °C, +/- 0.1 °C
Incubator type	Thermoelectric
Cuvette cell type	BioNex® disposable
Main detector	Colorimetric, temperature-controlled; halogen lamp with extended UV emission; automatic zeroing; accuracy of +/- 1% from 0 to 2.5 O.D.; linearity better than 0.5%; noise +/- 2 m Abs. at 340 nm 2.5 O.D.
DETECTOR TECHNOLOGY / NUMBER OF WAVELENGTHS	Interference filters / 9 + white
READING METHODS	Endpoint: mono- or bichromatic; differential endpoint; sample blank correction; kinetic
COMMUNICATION AND SOFTWARE	USB port; software compatible with Windows XP, 7.0, 8.0 and 10
SAMPLE ANALYSIS	Saved job lists from the software with the ability to select an independent list of parameters for each sample
CHAMPION ID	Alphanumeric
Random access to samples, calibrations, etc.	Yes
SAMPLE ADDED DURING EXECUTION	Yes
RESET OF SAMPLES AND REAGENTS	Yes
WORKING CALIBRATION DILUTION	Yes, from stock solution placed in the chilled tray
Pre-run sample dilution	Yes
POST-RUN DILUTION OF THE SAMPLE	Yes, auto-dilution and re-injection of out-of-scale samples
MULTILEVEL QUALITY CONTROL AND CLOSED LOOP	Up to 5 quality control levels, with closed-loop control and pre-programmed actions in case of quality control and/or spike recovery error
DATABASE AND QUALITY CONTROL CHART	Yes
AUTOMATIC SPIKE CONTROL AND RECOVERY	Yes
AUTOMATIC CALIBRATIONS; LINEAR, POLYNOMIAL, ETC. CALIBRATION CURVES.	Yes; up to 16 calibrators
Calibration correction	Yes; it allows you to enable/disable calibrants and modify the calibration fit
QUALITY CONTROL CALIBRATION AND RECALIBRATION	Yes, if the correlation is below the set value for re-calibration
REAGENT WHITE OPTICAL DENSITY (OD) CONTROL AND UPPER CALIBRATION	Yes, with pre-programmed actions in case of out-of-tolerance conditions
CORRECTION OF RESULTS	Yes, correction by dilution factor, humidity and weight
Importing Work List and Exporting Results to LIMS	Yes
POSSIBILITY OF USING MULTIPLE DILUENTS (SOILS, PHENOLS ANALYSIS, CYANIDES ETC.)	Yes
DIMENSIONS / WEIGHT	40 cm x 60 cm x 38 cm (height x width x depth) / 20 kg 15.7 in x 23.6 in x 14.9 in / 41.8 lb
Feeding	110-240 VAC - 50/60 Hz; single phase with earth; 2.0 Amp 230 VAC fuses, 4.0 Amp 115 VAC fuses